Zibo ShiNaite anti - corrosion Technology Co., Ltd
Contact: Wang Zhong
mobiles: 17663023308 15589303703
Address: Zibo City, Shandong Province Linzi District Qilu International Plastic City fine plasticized area 11-1
SNT-104 high temperature adhesive using the company's special high temperature inorganic silicate modified solution as a film-forming material, adding yttrium oxide, lanthanum oxide, cerium oxide, neodymium oxide and other rare earth oxides, zirconium powder as a filler composition to make.Two - component, mass ratio of 2: 1. Cured film thickness of 2200 ℃, in high temperature environment, to maintain good thermal stability, bonding properties, wear resistance and corrosion resistance. And can be in the high temperature 400-1000 ℃ under the conditions of direct construction, coating performance is not affected.
The solution used in the high temperature inorganic binder is re-chelated after the high temperature modification. The modified solution is more stable under the high temperature condition, the film type is also better and the density hardness is also improved.Adding powder filler are subject to high temperature and high pressure treatment of dispersed silicon carbide, rare earth oxides, zirconium powder, etc., in the high temperature linear expansion coefficient, antioxidant, sulfur gas corrosion. In particular, after curing at room temperature after more than 300 degrees of high temperature sintering, the volume will shrink between 3% -5%, the coating becomes more dense, higher bond strength.
Used in a variety of inorganic materials such as between metal and metal, between metal and refractory materials, between graphite materials, refractory materials, high temperature refractory repair, high temperature furnace lining material repair and high temperature powder Bonding and so on.