Zibo ShiNaite anti - corrosion Technology Co., Ltd
Contact: Wang Zhong
mobiles: 17663023308 15589303703
Address: Zibo City, Shandong Province Linzi District Qilu International Plastic City fine plasticized area 11-1
SNT-802 PTFE adhesive is a special high-temperature glue for tetrafluoroethylene material bonding. To solve the current problems for the adhesion of the existence of resistance to media and shedding problems, even those who can be long-term use.
Three points glue seven points to use, science is rigorous. So the use of tetrafluoroethylene glue is particularly important.
Treatment of tetrafluoroethylene
1, the first tetrafluoroethane material to 200 or so sandpaper anti-clockwise evenly polished its surface.
2, then the tetrafluoroethane professional treatment agent into a metal container, the appropriate volume or quality of PTFE material slowly delivered to the treatment agent, and stirring the treatment agent to avoid treatment agent layer, while the lid Cover the container to avoid evaporation of the treatment agent. The treated agent can not be poured into the unused treatment solution.
3, at room temperature infiltration 5-15 minutes, can clearly see the surface of the PTFE surface is black or blue can be removed when the PTFE material, remove the cover before the use of the treatment agent to avoid evaporation, while the treatment will be good The tetrafluoride material is washed with distilled water or cold water to clean the surface of the material.
4, the clean PTFE material into the oven or electric hair to dry its surface, until the surface is completely dry.
5, until the surface of its PTFE material dry and then dipped in a little PTFE surface cleaning agent on the surface of PTFE material to wipe several times, and then blow it or oven drying tetrafluoride surface.
Single glue use
Single group (heat curing) glue related operation
After heating, if the temperature of 90 ℃, at room temperature, slowly rose to 120 degrees, constant temperature 2- -5 minutes;
Glue operation, to be brought cotton gloves, to avoid contact with rubber gloves and treatment agents, in order to avoid chemical reactions, the rubber gloves to melt. The treatment agent can not touch the water, otherwise it will burn. In the glue work is best to wear a mask, to avoid direct contact with the nose and mouth treatment agent. Operating environment Note that ventilation. Glue, such as touch the skin, can be promptly washed with soap and water. Single set of glue not used up must be 3 ℃ to 5 ℃ refrigerator storage. The treatment agent needs to be sealed and stored, otherwise it will react with the oxygen in the air and will be oxidized.